Network Connector: | RJ45 with Link and Speed indicators |
Digital Audio Ethernet Protocol: | Dante |
Transmission Rate: | 100 Mbps |
Sample Rates Supported: | 44.1 kHz, 48 kHz (default) |
Bit Depth Supported: | 24 bits |
Audio Operating Levels: | -18 dBFS = +4 dBu |
Mic/Line Inputs to Network Interface Section | |
Mic Inputs | |
Inputs (4): | Balanced, detachable terminal block |
Gain: | Automatic; 40 dB for condenser mics, 60 dB for dynamique mics |
Input Level for +4 dBu: | -56 dBu (dynamic), -36 dBu maximum; -36 dBu (condenser), -19 dBu maximum (unclipped), -14 dBu maximum (soft clipped) |
Input Impedance: | > 1 kΩ |
Phantom Power: | P48, 48 Vdc |
Standard for Phantom: | IEC 61938: 2013 |
Frequency Response: | 20 Hz to 20 kHz (± 0.5 dB) |
THD+N: | < 0.1% |
Noise below +4 dBu: | < -70 dB |
CMRR: | > 70 dB (50 Hz to 120 Hz) |
Crosstalk: | < 70 dB (20 Hz to 20 kHz) |
Line Inputs | |
Inputs (8): | Balanced, detachable terminal block (4); Unbalanced, detachable terminal block (4) |
Input Level for +4 dBu: | +4 dBu (balanced); -10 dBV (unbalanced) |
Input Impedance: | > 20 kΩ |
Frequency Response: | 20 Hz to 20 kHz (± 0.5 dB) |
THD+N: | < 0.1% |
Noise below +4 dBu: | < -75 dB |
CMRR: | > 60 dB (50 Hz to 120 Hz) |
Crosstalk: | < 75 dB (1 kHz, any line to any mic channel), < 70 dB (20 Hz to 20 kHz) |
Headroom above +4 dBu: | > 18 dB |
Network to Line Level Interface Section | |
Outputs (4): | Balanced, detachable terminal block |
Output Level: | +4 dBu (nominal) |
Output Impedance: | 150 Ω balanced; 75 Ω unbalanced |
Frequency Response: | 20 Hz to 20 kHz (± 0.5 dB) |
THD+N: | < 0.05% |
Noise below +4 dBu: | < -80 dB (output active); < -95 dB (outputs muted) |
Crosstalk: | < 85 dB (20 Hz to 20 kHz) |
Headroom above +4 dBu: | > 18 dB |
Selectors (4): | MIC or LINE (rear panel) |
Indicators (13): | Power In (1); Output Signal LEDs (4); Input Signal LEDs (4); Network Sys and Sync (2), Ethernet Link and Speed (2) |
Power Connections (2): | Power Jack; Detachable Terminal Block |
Ambient Operating Environment: | 0° C to 40° C |
Power Requirement: | 24 Vdc @ 180 mA plus connected phantom loads, or PoE (RU-MLB4P) |
PoE (RU-MLB4P): | Class 0, IEEE 802.3af |
Dimensions: | 5.8" (15 cm) W; 1.7" (4.3 cm) H; 5.2" (13.2 cm) D |